top of page

Clear Bra Installation: Protecting Your Vehicle with PPF

Ford Shelby GT500 Clear Bra PPF
Ford Shelby GT500 Clear Bra PPF

Have you ever been driving down the highway and suddenly heard a loud ping on your windshield or hood, only to find a small crack in your paint afterwards? This is just one of the many types of damage that can occur to your car's paint from rocks, bugs, and other debris on the road. Luckily, there is a solution: clear bra installation. This article aims to provide you with comprehensive information about clear bra installation, its benefits, and how it can help protect your car's paint.

What is Clear Bra Installation?

Clear bra installation is a type of protective film that is applied to your car's paint to prevent damage from the hazards of driving. Made from a durable thermoplastic urethane material, it creates an invisible shield that can absorb impacts and scratches, protecting your car's paint job and maintaining its pristine appearance.

Benefits of Clear Bra Installation

  • Protection from Debris

As mentioned earlier, clear bra installation provides a layer of protection that shields your car's paint from the damage caused by rocks, bugs, and other debris on the road. This means that you can enjoy your drive without worrying about chips, scratches, or other types of damage to your car's exterior.

  • Cost-Effective

Investing in clear bra installation can save you money in the long run. Repainting a car or fixing paint damage can be a costly and time-consuming process. Clear bra installation is a one-time investment that can prevent such damage from occurring in the first place, thereby saving you money on repairs in the future.

  • Resale Value

Protecting your car's paint with clear bra installation can also increase its resale value. A car with a well-maintained exterior is more likely to attract potential buyers, and having clear bra installation can demonstrate to them that you have taken good care of your car.

How is Clear Bra Installed?

Clear bra installation involves the application of a protective film to your car's paint. This film is made from a special type of urethane that is designed to be resistant to scratches, chips, and other types of damage. The film is transparent, so it won't affect the appearance of your car's paint, and it can be easily removed if you ever decide you no longer need the extra protection. Clear bra installation is a relatively simple process that can typically be completed in just a few hours.

The first step is to thoroughly clean and prep your car's exterior to ensure that the film will adhere properly. Next, the clear bra is carefully applied to your car's paint using specialized tools and techniques to ensure a seamless, bubble-free installation.

Once the clear bra has been applied, it will need to be allowed to cure for a few hours. After that, your car will be ready to hit the road with its new layer of protection. And the best part is, the clear bra is virtually invisible, so you won't even notice that it's there.

The Benefits of Clear Bra PPF

Clear bra installation provides several benefits, including:

  1. Protection from rock chips, bug stains, and other debris.

  2. Prevention of fading and discoloration caused by UV rays.

  3. Enhanced resale value due to a well-maintained paint job.

  4. Ease of maintenance and cleaning.

Types of Clear Bra Installation

When it comes to the installation of clear bra, there are primarily two techniques: pre-cut and custom. Pre-cut clear bra installation is a standardized method that comes in a specific size and shape to fit the make and model of your car. This option is a quick and easy process that offers immediate protection to the vehicle's vulnerable areas.

Custom clear bra installation, on the other hand, is a specialized method that involves the creation of a bespoke film to match the specific curves and contours of your car. With custom clear bra installation, the result is a perfect fit that provides complete coverage and protection to your car's paintwork.

The customized clear bra installation involves a careful process where experts meticulously measure and design a precise pattern that fits your vehicle perfectly. It can take a bit more time than pre-cut installation, but the end result is a nearly invisible, flawless shield that offers ultimate protection against chips, scratches, and other damages.

At Lonestar Auto Boutique we use a custom approach, using our advanced machinery to craft a custom cut specific to your vehicles year, make and model. Once the custom cut is created, we hand trim and mold the clear bra and tuck them into the seems of your vehicle for a flawless look.

Clear Bra Installation Process

The clear bra installation process involves several steps:

  1. Thorough cleaning and preparation of the car's paint surface.

  2. Precise measurement and cutting of the clear bra material.

  3. Application of the clear bra material to the car's paint surface.

  4. Smoothing out any bubbles or imperfections.

How to Maintain Your Clear Bra

Clear bra installation is a great way to protect your vehicle's paint from scratches, chips, and other damage. However, just like any other car accessory, it requires regular maintenance to keep it in top condition. In this article, we'll cover some tips on how to maintain your clear bra installation and ensure it lasts for years to come.

  • Using Mild Soap and Water

To keep your clear bra clean, you should use a mild soap and water solution. This will help remove any dirt or grime that may have accumulated on the surface. Avoid using harsh chemicals or abrasive materials such as steel wool or scouring pads, as these can scratch or damage the clear bra material. Instead, use a soft cloth or sponge to gently wipe the surface. We offer a comprehensive exterior detail at The LAB if you would like our professional team to assist.

  • Cleaning Techniques

When cleaning your clear bra, it's important to use the right techniques to avoid causing any damage. Begin by rinsing the surface with clean water to remove any loose dirt or debris. Next, use a soap solution and a soft cloth or sponge to gently clean the surface. Be sure to rinse the surface thoroughly to remove any soap residue. Finally, use a microfiber towel to dry the surface, making sure to remove any excess water.

  • Avoiding High-Pressure Washes

While clear bra installations are designed to withstand the elements, they can be damaged by high-pressure washes. The high-pressure water can cause the clear bra to lift or peel away from the surface of the car. To avoid this, it's best to use a low-pressure wash or hand wash your vehicle instead.

  • Regular Inspections

Regular inspections are essential to maintaining your clear bra installation. Check the surface of the clear bra regularly for any signs of damage or lifting. If you notice any issues, it's best to have them addressed right away to prevent further damage.

Clear bra wrap is an excellent investment for anyone who wants to protect their car's paint from damage. By following the tips outlined in this article, you can enjoy the benefits of your clear bra for many years to come. Whether you want to preserve the value of your car or simply maintain its appearance, clear bra installation is the way to go. Don't wait until it's too late – schedule a clear bra installation today and enjoy the peace of mind that comes with knowing your car is fully protected.

7 views0 comments


bottom of page